All clips have the same purpose: to keep things secure. But you might be surprised at how many different types of pliers there are.
Every carpenter offers several types of clamps for drilling, shaping and fastening wood. They are used by plumbers and electricians to fasten pipes and tubes, fencers to wire fence posts and railings, and metalworkers for welding. Some types of pliers are even unintentionally useful.
I like to save money by replacing brake pads on a car, and there is no better tool to press the pistons back into the calipers than the C-clamp from my woodworking tool kit. When my neighbor's faucet handle broke, he replaced it by pressing a small C-clamp onto the valve stem. It worked so well that it still is.
Depending on where you look, you can find 30-40 types of pliers, and that's probably not all. Some have special uses, such as clamps that hold joints in place until the glue hardens. Many of them have multiple uses and this is the most valuable to know.
In most cases, you can avoid buying custom clips by adapting the clips you already have to the project you're working on.
© Familiesscrew clamp
One of the most effective clamping strategies is to advance the movable jaw toward the fixed jaw by rotating the threaded rod. Each rotation moves the jaw slightly, meaning you can apply a lot of force to the object between the jaws with minimal effort. And thanks to the thread, the stick cannot move back on its own.
Some of the most common types of clamps are screw clamps, including the following five types:
C-camp
Shaped like the letter "C", it is available in different sizes. The distance between fully open jaws (ie jaw capacity) varies from one inch to 10 inches. The movable sponge is located on the threaded rod. The transverse sliding pins on the ends provide the necessary leverage for rotation.
There are several ways to use C-clamps, including:
- Holding pieces of wood together by gluing or gluing;
- Attaches wooden objects to workbenches for carving or shaping;
- Holds metal together for welding.
Bench press
Ways, also known as defects, are permanently attached to the desktop. They are made of strong metal with wide jaws. You use clamps to hold metal or wood in place so you can drill, cut, or shape it.
rod clamp
If you need a wider jaw capacity than a C-clamp, you can use a slim clamp ie. sling video. One jaw is attached to a threaded rod that passes through a plate at the end of the metal rod, while the other jaw slides along the rod and locks into place.
Carpenters use staples to laminate pieces of wood, assemble frames for gluing or fastening, and make window sashes, among other things.
Quick release button
A quick-release clip, also known as a quick-release clip, has a trigger attached to the jaw. When you pull the trigger, the jaw releases from the rod, releasing the pressure on the object you're holding.
Quick release clamps are usually not as long as bar clamps and have soft jaws. They are great for connecting pieces of wood as you shape them or join them together.
manual pliers
A true woodworking tool, it has two wooden jaws and two side-by-side threaded metal bars with handles at opposite ends. The wood jaws leave no marks on the wood, and two rods provide more control over jaw alignment than one. Carpenters use it extensively to assemble high-quality wooden projects.
Spring clips
If you need to hold two pieces of material together during assembly, spring clamps are an alternative to screw clamps.
Spring-loaded pliers have a scissor-like action. The soft jaw opens when you squeeze both handles, and a built-in spring compresses the jaw when you release the handle. They are not as strong as screw clamps, but they are faster and easier to use.
Rope clip
Also known as a cable tie, a cable tie consists of a strong nylon rope with a strap mechanism attached to one end. You wrap the rope around the object you're securing, thread the loose end through the ratchet mechanism, and tighten the rope to secure the strap.
In the wood shop, it's perfect for attaching large picture frames while the glue joints are in place. This option also usually provides items in the back of the truck.
Bench press
A bench press has a base that is permanently attached to the workbench and a single jaw with a soft pad that is controlled by a pressure handle. Place the part under the jaw and squeeze the handle several times to move the jaw down and hold the part in place. Woodworkers use table clamps to hold wood together for sanding and shaping.
video clip
Plumbers and auto mechanics are among the people in this profession who need to attach flexible hoses to metal or plastic pipes with metal tape.
The most common cable ties have a perforated metal strip held in place by a nut. A screw threaded through a nut uses the hole in the rod as a worm to open and close the clamp as you turn the screw.
Spring clamps with double staples are also common. Pressing the lug expands the round metal ring, allowing the clip to slide over the tube. When you remove the ear, the ring snaps onto the tube to hold it in place.
